Boot2bonnet Restoration

A new project

Nick — Thu, 16 Feb 2012 18:53:50 +0000

This car has been waiting in the wings for it day under the knife. It has had quite a few body modifications, repairs, and patching. As this is a custom build the customer taped over the holes that needed to be welded up (green tape in photos). The goal is for a clean vintage style mini, with a dash of early 60′s coachwork. As of now the car is receiving a new front end and lower doorsteps/ quarter panels to bring back body lines and fix damage/ repairs.

Finished

Nick — Sat, 04 Feb 2012 23:49:43 +0000

The Cooper S is finally finished and ready for delivery. The body has been wet-sanded, polished and glazed. The owner has already assembled the frames and engine, ready to drop in and finish assembly. It is going to be a beautiful car when finished with a red and gold brocade interior.

The polishing stage

Nick — Sat, 21 Jan 2012 02:29:59 +0000

In the restoration industry everything that is painted is polished. If it is a show car then it is cut and polished. The “cut” refer to wet sanding the surface down top remove the orange peal for a glass smooth finish. Here are some of the parts and the body after the final cut and polish.

Another Black Roof

Nick — Tue, 10 Jan 2012 00:00:49 +0000

Roof was scuffed and painted black. Black has to be one of my favorite colors to pait as it show that you did the prepwork right, it will also show if you skipped a step or got lazy at any point. After final polish it will be a mirror finish as all black roofs should be. You will notice that the rear number plate was also painted gloss black to match the roof perfectly.

Final color on the body.

Nick — Mon, 02 Jan 2012 02:15:57 +0000

After final sanding the body, it was wiped down to check the reflection lines. Then came the final masking for paint. The final masking off was done once the car was in the paint booth. After spraying the red the roof will be sanded down and the black roof sprayed. Notice how the factory numbers come out nice and clear because they were masked off during priming and only received the final coats of paint. The final color is much darker than the pictures as the reflections in the booth make it appear orange.

Interior paint

Nick — Mon, 02 Jan 2012 01:52:41 +0000

Interior has been sanded and painted, the cross-member had to many defects and needed to be redone. The cross-member was masked off, prepped, re-masked and repainted for a flawless finish. Interiors are tough to paint as no matter how clean you get them debris comes out of all the cavities and gets in the paint, you just have to repair what is unacceptable.

Undercoat

Nick — Mon, 02 Jan 2012 01:44:51 +0000

The underside of the car has been undercoated and painted. You will notice in the first picture that the brackets/ mounts on the underside were not undercoated, just received the final coats of color. The masking on the final pictures is to prevent over spray when the interior is painted.

A quick project

Nick — Sat, 19 Nov 2011 02:01:59 +0000

While waiting for a perfect color match for the Cooper, I took on what was going to be a quick turn around. All that was originally wanted was front fillet plates added to make the early style front end. Then he decided to replace the entire front panel. After the old panel was removed It was decided to replace the inner fender as both were toast and the radiator shroud was about to fall off. I pointed out that the car was the wrong color and he then wanted a complete repaint and new cross-member installed. So what started out as a week job turned into 5 weeks worth of work. Here are some before, during, and after pictures.

More primer

Nick — Fri, 14 Oct 2011 01:13:26 +0000

After bodywork and block sanding the body was pulled apart again for primer. The interior panels were also body-worked and primed. People often ask what sets my work apart, and I feel it is the extra effort to smooth out the interior and door jambs that others often miss.

Fitting bright work and welding holes

Nick — Thu, 15 Sep 2011 23:32:20 +0000

I met with the customer and he noted that a few holes in the RH inner fender were not needed, so they were welded up along with some in the rear parcel shelf. He also gave me the bright work for the front of the car to be fitted before paint. What seemed like a simple task of fitting the grill and trim, was hours of refitting to make each side match and appear uniform.